High Pressure and High Temperature Wells Cementation using Calcium Oxide Additives: Review
Amosu C.O.
Amosu C.O., Department of Mineral and Petroleum Engineering, Yaba College of Technology, Yaba.
Manuscript received on 08 May 2021 | Revised Manuscript received on 10 May 2021 | Manuscript Accepted on 15 May 2021 | Manuscript published on 30 May 2021 | PP: 1-8 | Volume-1 Issue-1, May 2021 | Retrieval Number: 100.1/ijpe.A1901051121 | DOI: 10.54105/ijpe.A1901.051121
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Published by Lattice Science Publication (LSP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The challenges created by HPHT conditions make drilling and cementing difficult. The overwhelming challenge stands for materials used for wells operated at higher temperature and pressures in the face of producing downhole. There is need for better choice of cement for cementing operations during development and production of wells. The review method is adopted in this article considering Calcium Oxide which poses as good cement expander. In this paper, a broad overview of the fundamental understanding and use of calcium oxide as additive is considered for cementation of HPHT production wells will be discussed.
Keywords: High, Pressure, Temperature, Cement, Calcium, Oxide, Production.
Scope of the Article: Production Engineering